ADVANCED TROUBLESHOOTING

BEFORE DOING ANY TROUBLESHOOTING ON THE OVEN, MAKE SURE THOSE POINTS ARE OKAY

  • Does the main gas valve is open?
  • Does the ventilation hood is turn on?
  • Does the oven is plug to a good electrical source?
  • Is there a pressed emergency stop button?

Select oven generation

Gen 2
Gen 3

Gen 3

Troubleshooting list of problems

  • Oven is not starting after turning on the main switch
  • The main conveyor is moving in the wrong direction.
  • The entry / exit conveyors are not moving.
  • Temperature fluctuation / cooking difference (toppings)
  • Temperature fluctuation / cooking difference (bottom crust)
  • Temperature inconsistancy
  • No heating, without alarm
  • Battery icon

Troubleshooting list of alarms on screen

  • IGNITION FAILURE
  • PRESSURE SWITCH SIGNAL LOST
  • CONVEYOR STUCK
  • EMERGENCY STOP ENGAGED
  • HIGH TEMPERATURE LIMIT
  • DAMPER STUCK
  • TORQUE TOO HIGH
  • OVEN NEED LUBRICATION
  • FV1 ALARM: xxxxxxxxxxxx
  • FV2 ALARM: xxxxxxxxxxxx

Drive error

  • FVx – F003 – Power Loss
  • FVx – F004 – Under voltage
  • FVx – F008 – Heatsink OvrTmp
  • FVx – F009 – CC OvrTmp
  • FVx – F081 – DSI Comm Loss
  • FVx – F082 – Opt Comm Loss
  • FVx – F083 – EN Comm Loss
  • FVx – Fxxx other message

Gen 2

Troubleshooting list of problems

  • Oven is not starting after turning on the main switch
  • The main conveyor is moving in the wrong direction.
  • The entry / exit conveyors are not moving.
  • Temperature fluctuation / cooking difference (toppings)
  • Temperature fluctuation / cooking difference (bottom crust)
  • Temperature inconsistancy
  • HMI is off
  • Battery icon

Troubleshooting list of alarms on screen

  • IGNITION FAILURE
  • PRESSURE SWITCH SIGNAL LOST
  • CONVEYOR STUCK or TORQUE TOO HIGH
  • EMERGENCY STOP ENGAGED
  • HIGH TEMPERATURE LIMIT
  • MODBUS ERROR